| Arc Flash Forum https://brainfiller.com/arcflashforum/ |
|
| SKM Crashes https://brainfiller.com/arcflashforum/viewtopic.php?f=15&t=2479 |
Page 1 of 1 |
| Author: | Superman Engineer [ Thu Oct 11, 2012 8:15 am ] |
| Post subject: | SKM Crashes |
I use both ETAP and SKM for few years to performing power system studies. While using SKM it crashed three to four times per day, and it happens when I am already schedule for so tight deadlines. I was wondering if that problem is with my SKM or it is normal for SKM to crash three to four times a day. I am using version 6.5. |
|
| Author: | PaulEngr [ Thu Oct 11, 2012 7:29 pm ] |
| Post subject: | |
Superman Engineer wrote: I use both ETAP and SKM for few years to performing power system studies. While using SKM it crashed three to four times per day, and it happens when I am already schedule for so tight deadlines. I was wondering if that problem is with my SKM or it is normal for SKM to crash three to four times a day. I am using version 5.5.1.3 (Build 2). Even with newer versions, it's still unstable and buggy as hell. For instance if you go straight to the settings page for a breaker, it shows up blank or crashes. Clicking on another item and then the settings page avoids the bug. |
|
| Author: | AB P.E. [ Fri Oct 12, 2012 7:44 am ] |
| Post subject: | |
More than one user of SKM Power*Tools here. We find crashes occur during TCC manipulation. After we display 2 or more TCC curves, and start to adjust them, there is a tendency to crash. Other crashes do occur, at this site crashes during TCC work are repeated. |
|
| Author: | Superman Engineer [ Fri Oct 12, 2012 10:58 am ] |
| Post subject: | |
So it's not only my SKM. lol I wish SKM could have solved these issues. |
|
| Author: | Johnny Ma [ Mon Oct 15, 2012 12:00 pm ] |
| Post subject: | |
Hi Everyone, Johnny from SKM here. All the issues has been fixed in later releases of version 6.5 and 7.0. If you haven't already, you can download the latest versions on our website. Any further issues, please contact me at johnny at[url='http://www.skm.com']www.skm.com[/url] Thanks, --Johnny |
|
| Page 1 of 1 | All times are UTC - 7 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|