| Arc Flash Forum https://brainfiller.com/arcflashforum/ |
|
| Electrically Safe Work Condition - Grounding https://brainfiller.com/arcflashforum/viewtopic.php?f=33&t=2799 |
Page 1 of 1 |
| Author: | Jim Phillips (brainfiller) [ Sun Jun 23, 2013 2:29 pm ] |
| Post subject: | Electrically Safe Work Condition - Grounding |
As part of the process for achieving an electrically safe work condition, NFPA 70E 120.1(6) says phase conductors should be grounded if there is a possibility of induced voltages, stored energy or contact with other energized conductors. This week’s question: Do you ground conductors when establishing an electrically safe work condition?
|
|
| Page 1 of 1 | All times are UTC - 7 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|