| Arc Flash Forum https://brainfiller.com/arcflashforum/ |
|
| Have you had a burn injury? (from any cause) https://brainfiller.com/arcflashforum/viewtopic.php?f=33&t=4649 |
Page 1 of 1 |
| Author: | Jim Phillips (brainfiller) [ Sun May 13, 2018 6:26 am ] |
| Post subject: | Have you had a burn injury? (from any cause) |
Since the main focus of arc flash protection is protection from serious burn injury, this week’s question is about just that: Burn injury. First degree burns usually result in skin that is mostly red and puffy (and hurts) but let’s go beyond that. Second degree/partial thickness and third degree/full thickness burns are significantly more serious. This week’s question is about burn injury from ANY source not just from an arc flash: Have you ever received a second or third degree burn? Second Degree/Partial Thickness Third Degree/Full Thickness Neither Of course, this is one that could result in a good story or two so please pass yours along. How bad was it, what was the cause, recovery etc. |
|
| Author: | powerengineer [ Mon May 14, 2018 5:37 am ] |
| Post subject: | Re: Have you had a burn injury? (from any cause) |
Should have read the question completely. Back in junior high school a very long time ago, I was in shop class, and instead of picking up my welding mask after replacing a welding rod, I grabbed the piece of metal I was welding. Left a nice blister on the palm of my hand. |
|
| Page 1 of 1 | All times are UTC - 7 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|