FREE Live Streaming Class – 1 PDH / 0.1 CEU
Major Changes – 2021 Edition of NFPA 70E – Standard for Electrical Safety in the Workplace.
June 18, 2020 – 10:00 AM Pacific Daylight Time / 1:00 PM Eastern Daylight Time
The 2021 Edition of NFPA 70E is right around the corner and with it – many changes. Every three years I have the privilege of writing about the upcoming changes for the National Electrical Contractor Association’s Electrical Contractor Magazine. I am following this up with a FREE one hour live streaming class where I will be discussing the major changes from the latest revision cycle. [2021 NFPA 70E ARTICLE]
Learn about changes such as:
- New and Revised Definitions such as Arc Resistant Equipment
- 110.2(A)(4) Type of Training: An informational note was added: “Classroom training can include interactive electronic or interactive web-based training components.” This recognizes that electronic training is widely used.
- Table 130.5(C) Estimate of the Likelihood of Occurrence of an Arc Flash Incident for AC and DC Systems: A new task was added as YES for likelihood of an arc flash incident for any condition. “Operation of a CB or switch the first time after installation or completion of maintenance in the equipment.”
- New Article 360 Safety-Related Requirements for Capacitors.
Register and Login
Select a ticket for this program (above) and register so you will receive access to both the recorded video and continuing education credit.
To Enter the live streaming event up to 30 minutes prior to the start time, Click the link below.
If you have login issues, contact Zoom.us as we have no control over the Zoom platform.
You May Also Be Interested In:
16 PDH / 1.6 CEU
June 22 thru June 25
Live Streaming with Q&A – 4 – Four Hour Sessions
11:00 AM – 1:00 and 2:00 PM – 4:00 PM Eastern Daylight Time
8:00 AM 10:00 AM and 11:00 AM – 1:00 PM Pacific Daylight Time
Also FREE access will be provided to the streaming version of this course.
Sample video from previous live streaming. Overview | Sample Problem | Shallow Enclosure Arc Flash Test Video
Call us at 800.874.8883 or email our Program Director if you have any questions or would like to schedule any of our training programs for your group.