| Author |
Message |
|
Billy XU
|
Post subject: regarding to "e" and "E" used in Table 2 of Coefficient  Posted: Sun Aug 27, 2023 3:06 am |
|
Joined: Fri Aug 18, 2023 8:45 am
Posts: 2
|
|
Hello everyone.
I am starting to do self-study the IEEE 1584:2018 standard for arc-flash calculation.
During the reading of the data from Table 2 Coefficient for Equation (2), I found there is different written of wording.
For. e.g, for K2 factor:
"−6.0287E-05" for VCBB is described and "−3.097e-06" for HCB is used.
My question is for "e" in the table data sheet is it just mistake which shall be to "E" instead? for e.g, "−3.097e-06" corrected to "−3.097E-06" = "-3.097x10-6".or,
there is different meaning for "e", for e.g, "natural logarithm"?
Thanks for your help.
| Attachments: |
Table 2 of IEEE 1584 Y2018.JPG [ 55.73 KiB | Viewed 1654 times ]
|
|
|
| Top |
|
 |
|
Jim Phillips (brainfiller)
|
Post subject: Re: regarding to "e" and "E" used in Table 2 of Coefficient Posted: Sun Aug 27, 2023 5:07 pm |
|
| Plasma Level |
 |
Joined: Mon Sep 17, 2007 5:00 pm
Posts: 1736
Location: Scottsdale, Arizona
|
|
I believe that is a typo since these are all coefficients in scientific notation.
It has been added to the list for next time.
Thanks!
|
|
| Top |
|
|
 
|
Page 1 of 1
|
[ 2 posts ] |
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
