Technical Articles

Technical Articles - Page 4 of 14 - Arc Flash & Electrical Power Training | Brainfiller

Figure 1 One Line scaled

How to Perform an Arc Flash Study – Part 3
Arc Duration

How to Perform an Arc Flash Study – Part 3
Arc Duration: Time is everything when an arc flash occurs. The longer the duration, the greater the incident energy exposure – which is directly proportional to the duration. The 2018 Edition of IEEE 1584 defines the arc duration , also referred to…

Read More »
Grounding and Power Quality

How to Perform an Arc Flash Study – Part 2
Arcing Fault Current

How to Perform an Arc Flash Study – Part 2
Arcing Fault Current: Arcing Fault Current – Effect of Gap, Voltage and Electrode Configuration An arc flash occurs when short circuit current jumps across an air gap between energized conductors. The event is normally the result of initial (and inadvertent) contact between energized…

Read More »
Warning! No Arc Flash Hazard Exists!

Warning! No Arc Flash Hazard Exists!

Warning! No Arc Flash Hazard Exists!: I’m sure that title raised a few eyebrows but before you send me an email telling me how I got this wrong, hang in there for the rest of the thought. I receive questions about this phrase on a pretty…

Read More »
Jim Phillips in his PPE

2021 NFPA 70E – Major Changes

Jim Phillips, P.E. Every three years I have the privilege of writing the NFPA 70E Changes article for National Electrical Contractor Association’s magazine: Electrical Contractor . The NFPA 70E 2021 edition of this standard will be available September 4, 2020…

Read More »
Murphy's Law - Sled

Captain Murphy, Dirty Harry and Electrical Safety

Rocket Sled that Inspired “Murphy’s Law” OK, not the most professional sounding title for an article about electrical safety. But play along, you will be able to connect the dots rather quickly. Captain Murphy Around seventy years ago, Captain Murphy…

Read More »